2016 TAYLOR TXH350L Image
Stock Number: EQU020041
Make: TAYLOR
Model: TXH350L
Year: 2016
2016 TAYLOR TXH350L Details
2012 Manitou 48" Forks Image
Stock Number: ATT203
Make: Manitou
Model: 48" Forks
Year: 2012
2012 Manitou 48" Forks Details
2011 JLG Truss Jib 12' Image
Stock Number: ATT159
Make: JLG
Model: Truss Jib 12'
Year: 2011
2011 JLG Truss Jib 12' Details
2010 Capacity TJ5000 DOT Image
Stock Number: EQU012898
Make: Capacity
Model: TJ5000 DOT
Year: 2010
2010 Capacity TJ5000 DOT Details
2016 JLG 450AJ Image
Stock Number: 300714
Make: JLG
Model: 450AJ
Year: 2016
2016 JLG 450AJ Details
2015 FrostFighter IDF350 Image
Stock Number: EQC003202
Make: FrostFighter
Model: IDF350
Year: 2015
2015 FrostFighter IDF350 Details
 
Daewoo Counterbalance Forklifts Texas

Daewoo Counterbalance Forklifts Texas

Utilizing a Standard Counterbalance forklift
1 Prior to utilizing the equipment, carry out a pre-shift inspection. OSHA guidelines do state that pre-shift checklists need to be carried out every day or every shift. Each different equipment and its attachments has its own checklist listing steering, brakes, lights, emergency brakes, controls, horn and safety features.

2 When starting up the machine and check the controls, it is vital to make sure that the seatbelt is fixed firmly and the seat has been adjusted for your maximum comfort. Look underneath the machinery after you move it for any signs of leaks. The operation of every type of forklift is different.

3 Don't forget differences in the basics of lift truck operation as opposed to a regular vehicle. The forklift's rear end swing happens due to the fact that the truck steers using its rear wheels. Disregarding this fact is a main reasons for accidents and injuries to workers. The almost 90-degree turn from the front wheels should be made with great care. These top-heavy machinery have a high center of gravity even without a load. When transporting or lifting a load this top-heaviness is exacerbated.

4 Keep forks near the floor when traveling. Use care when approaching loads. Be sure the forks line up correctly with the pallet. Lift the load just as high as is required, tilting it back to help stabilize the equipment. Only drive backwards if the load is so bulky that it interferes with driver vision.

5 Check the wheels on trailers/trucks prior to unloading and loading. Do not travel on slopes, especially when lifting a load. The machine can tip over on a slope. When driving on an incline is necessary, always drive up the slope and back down. The load should be kept on the uphill side of the truck.

6 The lift truck driver should always be in firm control at all times. Tipping over is the main cause of operator injuries. The operator must never try to jump out of the truck in the event of a tip-over. The safest method is to lean away from the direction of fall while holding the steering wheel and bracing your feet.

  • Comedil Cranes Texas
    Tower Cranes Grow to New Heights Within the tower crane industry, the 1950s showcased many important milestones in tower crane design and development. There were a variety of manufacturers were beginning to make more bottom... More
  • TCM Pneumatic Tire Forklifts Texas
    When it comes to maintaining the lift truck, it could be easy to neglect the simple yet important tire. If you pick the wrong tire, you could end up accidentally with a huge increase in... More
  • Nissan Propane Forklifts Texas
    The electric lift truck and the IC or internal combustions lift truck are the two main fuel types for forklifts utilized in the industry. The electric forklift is normally utilized indoors away from the elements.... More
  • Toyota IC Forklifts Texas
    Electric forklift units make up almost 60 percent of the forklift market. These models are powered by big, heavy lead-acid batteries that that prevents the machinery from tipping over as it gives it the counterweight.... More
  • Terex Knuckle Boom Lifts Texas
    Telescoping Boom Lifts Telescoping booms lifts are designed to mount a work bucket on an extendable, straight arm that is situated on a rotating turntable. Typically, telescoping boom lifts are used for tasks which require... More